The s5system LL-7M is a LoRaWAN Leaf Moisture Sensor for IoT of Agriculture. It is designed to measure the leaf moisture and temperature, so to send to the platform to analyze the leaf status such as : watering, moisturizing, dew, frozen. The probe is IP67 waterproof.

LL-7M detects leaf’s moisture and temperature use FDR method, it senses the dielectric constant cause by liquid over the leaf surface, and convert the value to leaf moisture. The probe is design in a leaf shape to best simulate the real leaf characterizes. The probe has as density as 15 leaf vein lines per centimeter which make it can senses small drop and more accuracy.

The LoRa wireless technology used in LL-7M allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

LL-7M is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.

Each LL-7M is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

Solution Features

Applications

• Smart Agriculture

The s5system LS-MDD is a LoRaWAN Microwave Radar distance sensor. It uses 24Ghz Microwave to detect the distance between the sensor and different objects. Compare vs the ultrasonic or Lidar measurement method, Microwave Radar is more reliable for condensation / dusty environments. It can sense the correct distance even there is water or thick dust on top of the sensor.

The LS-MDD can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.

LS-MDD can measure two distances: the closest object and the next object behind the closest one.

LS-MDD supports the Alarm Feature, the user can set the LS-MDD to uplink data in a short interval when the distance is out of configured range.

The LoRa wireless technology used in LS-MDD allows devices to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

LS-MDD is powered by an 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.

Each LS-MDD is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

Solution Features

• LoRaWAN 1.0.3 Class A
• Ultra-low power consumption
• Microwave Radar for distance detection
• Measure Range: 0.5m ~ 20m
• Accuracy: ±10cm
• Horizontal Angel: 78°
• Vertical Angel: 23°
• Short uplink interval for Distance Alarm
• Monitor Battery Level
• Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865 AT Commands to change parameters
• Uplink on periodically
• Downlink to change configure
• 8500mAh Battery for long term use
• Wall Mountable
• Outdoor Use
  

Application

• Horizontal distance measurement
• Liquid level measurement
• Parking management system
• Object proximity and presence detection
• Intelligent trash can management system
• Robot obstacle avoidance
• Automatic control, sewer
• Bottom water level monitoring

The s5system LTL-7U is a NB-IoT Distance Detection Sensor for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.

The LTL-7U can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.

NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.

LTL-7U supports different uplink methods include TCP, MQTT, UDP and CoAP for different application requirement.

LTL-7U is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)

To use LTL-7U, user needs to check if there is NB-IoT coverage in local area and with the bands LTL-7U supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install LTL-7U to get NB-IoT network connection.

Solution Features

• NB-IoT Distance Sensor Node
• Flat object range 280mm – 7500mm
• Accuracy: ±(1cm+S*0.3%) (S: Distance)
• Measure Angle: 40°
• Distance Detection by Ultrasonic technology
• Ultro low power consumption
• NB Bands: B1/B3/B8/B5/B20/B28 Uplink via MQTT,TCP,CoAP or UDP
• AT Commands to change parameters
• IP66 Waterproof Enclosure
• Uplink on periodically
• Temperature Compensation for measurements

Applications

• Horizontal distance measurement
• Liquid level measurement
• Parking management system
• Object proximity and presence detection
• Intelligent trash can management system
• Robot obstacle avoidance
• Automatic control, sewer
• Bottom water level monitoring

The s5system LTL-7N is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution. It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
LTL-7N sensor is installed directly below the container to detect the height of the liquid level. User doesn’t need to open a hole on the container to be tested. The non contact measurement makes the measurement safety, easier and possible for some strict situation.

LTL-7N uses ultrasonic sensing technology for distance measurement. LTL-7N is of high accuracy to measure various liquid such as: toxic substances, strong acids, strong alkalis and various pure liquids in high-temperature and high-pressure airtight containers.
NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency,especially in deep coverage.

LTL-7N supports different uplink methods include TCP, MQTT, UDP and CoAP for different application requirement.
LTL-7N is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)

To use LTL-7N, user needs to check if there is NB-IoT coverage in local area and with the bands LTL-7N supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install LTL-7N to get NB-IoT network connection.

Solution Features

• NB-IoT None Contact Liquid Level Measure
• Valid level range :20mm – 2000mm
• Liquid Level Measure by Ultrasonic technology
• Ultro low power consumption
• NB Bands: B1/B3/B8/B5/B20/B28
• Uplink via MQTT,TCP,CoAP or UDP
• AT Commands to change parameters
• IP66 Waterproof Enclosure
•  Uplink on periodically
• High capacity 8500 mAh Li-SOCI2 battery

Applications

• Smart liquid control solution

The s5system LS-MTEC is a NB-IoT Soil Moisture & EC Sensor designed for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to IoT Server via NB-IoT Network.

NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.

LS-MTEC supports different uplink methods include TCP, MQTT, UDP and CoAP for different application requirement.

LS-MTEC is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)

To use LS-MTEC, user needs to check if there is NB-IoT coverage in local area and with the bands LS-MTEC supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install LS-MTEC to get NB-IoT network connection.

Solution Features

• NB-IoT Sensor Node
• Monitor Soil Temperature
• Monitor Soil Moisture
• Monitor Soil Conductivity
• Temperature Compensation for measurements
• Ultro low power consumption
• NB Bands: B1/B3/B8/B5/B20/B28
• Uplink via MQTT,TCP,CoAP or UDP
• AT Commands to change parameters
• IP66 Waterproof Enclosure
• Uplink on periodically
• 8500mAh battery

Application

• Smart Agriculture

The s5system LS-PH is a LoRaWAN Soil pH Sensor for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
LS-PH probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil’s pH with high accuracy and stable value. The LS-PH probe can be buried into soil for long time use.
The LoRa wireless technology used in LS-PH allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LS-PH is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LS-PH is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

Solution Features:

• LoRaWAN 1.0.3 Class A
• Ultra-low power consumption
• Monitor soil pH with temperature compensation
• Monitor soil temperature
• Monitor Battery Level Support pH calibration by end user
• Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
• AT Commands to change parameters
• Uplink on periodically
• Downlink to change configure
• IP66 Waterproof Enclosure
• IP68 rate for the Sensor Probe
• 8500mAh Battery for long term use

Applications

• Smart Agriculture

The s5system LS-WF is a LoRaWAN Flow Sensor. It detects water flow volume and uplink to IoT server via LoRaWAN network. User can use this to monitor the water usage for buildings.
LS-WF is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 10 years. (Actually Battery life depends on the use environment, update period.)
The LS-WF will send water flow volume every 20 minutes. It can also detect the water flow status and send Alarm, to avoid the waste for water usage such as broken toilet case.
LS-WF is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
Each LS-WF is pre-load with a set of unique keys for LoRaWAN registration, register these keys to LoRaWAN server and it will auto connect after power on.

Solution Features:

• LoRaWAN v1.0.3 Class A protocol
• Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
• Upload water flow volume
• Monitor water waste
• 8500mAh industrial battery(none-rechargeable)
• AT Commands to change parameters
• Uplink on periodically and open/close event
• Datalog feature
•  Remote configure parameters via LoRa Downlink
• Firmware upgradable via program port
• Wall Mountable
• Outdoor Use

Application

• Flow Sensor application
• Water Control
• Toilet Flow Sensor
• Monitor Waste water

S5 System Access Management Solution:

• Our wireless mesh network of card readers creates their own dedicated invisible andsecure wireless mesh network, eliminating any power, network, or even extra enclosure.
• Comes with robust IP-68 enclosure with built-in battery Just need a screw or double-sidedtape to hold it on any surface.
• Does not need a server, physical footprint for modules and network. The backend is allon an Australian cloud (AWS/Azure/Google).
• All redundant secure cloud service ensures % availability.
• Compatible with all current RFID tags, plastic access cards, NFC cards.
• Used for Lockers, Gate access, Control Panel Access, Operator Station PC access.
• Wireless battery-powered hardware including card readers, door locks, sensors, alarm system and many more depending on the client’s requirement.
• Easy management of the roles and access privileges of individuals in the workplace in one system.
• Comprehensive real time monitoring of all staff throughout the entire plant.
• Software includes: password-management tools, provisioning software, security-policy enforcement applications, reporting, monitoring and identity repositories.
• Compatible with all off-the-shelf smart door locks.

Our Solutions Feature:

• User friendly application for easy smart monitoring with personalized dashboard for wireless hardware management.
• Compatible with your own existing company badge, fob or swipe card to access or identify yourself.
• Activate / De-activate users, assign rosters and shifts, all with a web-based administration portal.
• Get periodic reports and customizable SMS/Email notifications.
• Our Wireless Battery-Powerd Card readers come with years battery life GUARANTEED.
• No Wi-Fi access needed; The Card readers create their own mesh network.
• Wireless and battery powered devices for remote locations (Battery: 5-10 years).
• Safe and secure database management and data transmission.

Applications

Liquid Level Monitoring

End-to-End IoT Solution

Now imagine the time and money you can save by automating this process using our battery powered IoT level sensors. Your workforce can now monitor all your tanks remotely on their computers or mobile devices using a specically designed dashboard for your business.

Solution Benefits

• Real time monitoring of liquid levels.
• Optimization of Supply & Demand from historical consumption behaviors.
• Leak detection and prevention.
• Overflow prevention.
• Save time and money by reducing manual operation and measurements.
• Improved safety in your operations.
• Remote monitoring of hazardous liquids.

Applications